- April 13, 2021
- | 0
In this report we’re going to examine how to make your own dog mask. We’ll cover the basics and then go on to look at a number of the more advanced tips and tricks that you can use.
For those who have a dog that likes to bark, and especially if your dog loves to play in the garden and other areas of the house, you will need to get them some special dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the first part of the setup which will look a little scary at first, but it is actually quite simple. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t simply cut a rectangular shape from the cardboard, so you’ll need to cut around the edge of the mask so that you get something that looks like a cone. The main thing here is to be realistic with what type of paper plate that you’re using.
Then you will need to wrap the cardboard around the edges of the paper plate, making certain there is a good seal between the two pieces so that you can ensure that nothing will leak when you put the mask on. Be sure that the edges are cut so the edges are not sharp, as this can damage the edges of the mask.
Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making sure that it runs smoothly and evenly across the entire mask. You’ll want to start with one side of the mask , so that you can work your way round it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs across the cardboard.
Don’t worry too much about the paint getting stuck into your mask. It’s easy to remove it later, and it will leave you with a nice finished mask to show off to everyone! It’s also a good idea to wash away any excess paint after you’re done, so that you don’t wind up with smudges or smears on your dog.
Then it’s time to paste the mask onto your dog’s head. First you need to make sure that you get a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it is secure, then you can start to glue the mask on the dog’s face. Take the piece of cardboard that is used for the base of the mask and fold it over. Be sure that it’s quite strong and then use your hands to secure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds until you’ve got the mask snugged firmly onto the surface of your dog. Do not make the folds too big or else it might look messy. As soon as you’ve done this, you can then take out the mask and then attach the cardboard ears. And attach the http://blog.icespike.com/?p=3070 other part of the mask onto the dog. Be sure the ears are level and make sure that it is not too short or long as this will cause some problems with the mask slipping off the dog’s face.
If you’re using a dog mask as your dog protection, you’ll have to do some sanding to be certain it is safe on your dog. You can accomplish it by sanding off any excess paper which might have been eliminated from your mask.